Sonnet

Sonnet: Biyork HydroGen 7 collection 7mm SPC Rigid Core Vinyl Plank, 60″ x 9″ x 7mm, 20 mil / 0.5mm wear layer, 100% waterproof, Uniclic angle/angle click (I4F), floating installation. 22.44 sq ft per box.

Coverage calculator1 box covers 22.44 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: BY-H7-09 Category: Brand:

Description

Sonnet from the Biyork HydroGen 7 collection by Biyork Floors is a 7mm spc rigid core vinyl plank.

  • Product Type: 7mm SPC Rigid Core Vinyl Plank
  • Plank Size: 60″ x 9″ x 7mm / 1524mm x 228mm x 7mm
  • Surface: Wood Texture, EIR, TrueShield, Pressed Bevel
  • Wear Layer: 20 mil / 0.5mm
  • Underlayment: 1.5mm IXPE (UnderTone) attached
  • Features: 100% waterproof, radiant heat compatible (water-based), on/above/below grade, -30 to +50 C stability, 80 x 80 ft max area without transition
  • Installation: Uniclic angle/angle click (I4F), floating
  • Commercial Warranty: 10 years
  • Residential Warranty: 40 years
  • Certifications: FloorScore, EPD verified
  • Coverage / Box: 22.44 sq ft (6 pieces)

Additional information

Collection

HydroGen 7

Product Type

7mm SPC Rigid Core Vinyl Plank

Plank Size

60" x 9" x 7mm / 1524mm x 228mm x 7mm

Surface

Wood Texture, EIR, TrueShield, Pressed Bevel

Wear Layer

20 mil / 0.5mm

Underlayment

1.5mm IXPE (UnderTone) attached

Features

100% waterproof, radiant heat compatible (water-based), on/above/below grade, -30 to +50 C stability, 80 x 80 ft max area without transition

Installation

Uniclic angle/angle click (I4F), floating

Commercial Warranty

10 years

Residential Warranty

40 years

Certifications

FloorScore, EPD verified

Coverage / Box

22.44 sq ft (6 pieces)

Reviews

There are no reviews yet.

Be the first to review “Sonnet”

Your email address will not be published. Required fields are marked *

What Victoria homeowners say

★★★★★5.0 on Google (188 reviews)

“WOW! Zafer did a great job! So fast and even did a marvellous job on the stairs! Will use his services on my next project for sure! He even installed my Costco Vinyl flooring that I provided. See my...”

Scott W.

“Zafer replaced our floors and was so professional and kind. Showed up early and quickly got to work, finishing on time as estimated. Was a great experience dealing with someone so professional and...”

Shane K.

“Found this store from google map and went to visit the store in person. I’m so glad I decided to go ahead and have them to replace our kitchen floor. They gave us very professional advice and are not...”

B F.
See all 188 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy