Nelson

Nelson: Ocean Falls engineered oak, 7 1/2″ x 74″, available 1/2″ or 3/4″ (Plus), brushed matte finish.

Category: Brand:

Description

Ocean Falls engineered hardwood brings refined wood grain and natural beauty to any room. Available as Ocean Falls 1/2″ (1.2 mm) x 7 1/2″ x 74″ and Ocean Falls Plus 3/4″ (1.2 mm) x 7 1/2″ x 74″ oak engineered flooring. Brushed matte finish with 10% aluminum oxide gloss, micro-beveled on all four sides. Tongue and groove system for floating, glued or nail-down installation on any floor. 25-year residential and 3-year commercial warranty.

Additional information

Color

Nelson

Thickness

1/2" (Ocean Falls) or 3/4" (Ocean Falls Plus); 1.2 mm wear layer

Wear Layer

1.2 mm

Plank Size

7 1/2" x 74"

Species

Oak

Finish

Brushed matte, 10% aluminum oxide gloss

Edge

Micro-beveled 4 sides

Installation

Floating, glued or nailed (T&G); all levels

Warranty

25-year residential; 3-year commercial

Collection

Ocean Falls

Construction

Engineered oak, T&G

Sq Ft per Box

31.19 sq ft (1/2″) / 23.39 sq ft (3/4″ Plus)

What Victoria homeowners say

★★★★★5.0 on Google (194 reviews)

“Zafer did an amazing job on our new floors, he was so accommodating to schedule restraints, and delivered timely and excellent service. Thank you Zafer!”

Genny C.

“Zafer and his team are simply the best! Through every step of the process, they were professional, prompt and communicated clearly. They redid all of the flooring in our home and we are so happy with...”

Christina K.

“Zafer, the owner and installer for our job, was a pleasure to work with. Very friendly and polite. With great attention to detail, will use him again for sure! Highly recommend.”

ben L.
See all 194 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate
Visitors: 7,197

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy