Naked Oak engineered hardwood by Vidar Flooring

Naked Oak

Get a Free Estimate

Naked Oak: Vidar American White Oak 7-1/2″ engineered hardwood, American White Oak, 7-1/2″ x 9/16″ (195mm x 14.5mm), 3mm veneer, wirebrushed BONA UV lacquered ultra matte. 34.18 sq ft per box.

Coverage calculator1 box covers 34.18 sq ft

Room area (sq ft) Add 10% for waste (cuts and pattern matching)

Total area needed-

Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: VIDAR-AO7-05 Category: American White Oak 7-1/2" Brand: Vidar Flooring

Description

Naked Oak from the Vidar Design Flooring American White Oak 7-1/2″ collection is an engineered hardwood floor in American White Oak.

Collection: American White Oak 7-1/2″
Species: American White Oak
Product Type: Engineered Hardwood
Construction: Engineered Multi-layer Hardwood
Size: 7-1/2″ x 9/16″ (195mm x 14.5mm)
Length: Random length 23.6″-82.6″ (600-2100mm)
Veneer (Wear Layer): 3mm dry sawn wood layer
Grade: Character, Select, Select and Better
Surface: Wirebrushed
Finish: BONA UV Lacquered, Ultra Matte
Bevel: Micro-V bevel (4 sides)
Radiant Heat: Hydronic radiant heat compatible
Janka Hardness: 1360
Installation: Tongue and groove profile, nail down installation with glue assist is recommended
Certifications: NOA, FSC, EPH, CARB 2, FloorScore
Warranty: Limited 35 years finish warranty, lifetime structural warranty
Coverage / Box: 34.18 sq ft
Box Weight: 55 lbs
Spec Sheet: Specification sheet (PDF)

Real wood: colour and grain vary naturally between planks; supplier photos show Select and Better grade.

Additional information

Collection	American White Oak 7-1/2"
Species	American White Oak
Product Type	Engineered Hardwood
Construction	Engineered Multi-layer Hardwood
Size	7-1/2" x 9/16" (195mm x 14.5mm)
Length	Random length 23.6"-82.6" (600-2100mm)
Veneer (Wear Layer)	3mm dry sawn wood layer
Grade	Character, Select, Select and Better
Surface	Wirebrushed
Finish	BONA UV Lacquered, Ultra Matte
Bevel	Micro-V bevel (4 sides)
Radiant Heat	Hydronic radiant heat compatible
Janka Hardness	1360
Installation	Tongue and groove profile, nail down installation with glue assist is recommended
Certifications	NOA, FSC, EPH, CARB 2, FloorScore
Warranty	Limited 35 years finish warranty, lifetime structural warranty
Coverage / Box	34.18 sq ft
Box Weight	55 lbs

Reviews

There are no reviews yet.

Be the first to review “Naked Oak”

What Victoria homeowners say

★★★★★5.0 on Google (192 reviews)

“I was very pleased with our experience with Zafer. He was wonderful to deal with. Very professional and friendly. And my new floors look great!”

Anita S.

“PI Floors Transformed Our Basement – Zafer Is a Gem I recently completed a full basement renovation and chose PI Floors in Royal Oak for the flooring installation. I’ll be honest—I actually found...”

Manesh B.

“Very pleased with both product and service. Zafar runs an affordable flooring business and goes above and beyond to ensure client is satisfied. Definitely glad I went with him over the bigger stores...”

Vikram B.

See all 192 Google reviews →

Installation & care

Before installation

Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.

Installation tips

Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
Mix planks from several boxes as you lay them for a natural look.
Always follow the installation instructions and warranty terms for this specific product.

Care and maintenance

Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
Wipe up spills quickly and use felt pads under furniture legs.
Use door mats at entrances to keep grit from scratching the surface.

Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy