Mountain Fog
Mountain Fog - Image 2
Mountain Fog - Image 3

Mountain Fog

Get a Free EstimateRequest a Sample

Harbinger vinyl flooring in Mountain Fog. 4.5mm (3.0mm LVT + 1.5mm IXPE) thick, 0.55mm wear layer, 16″ x 32″ Tile. Glue Down installation, beveled. 35.56 sq ft per box.

SKU: TQZ 2304T Categories: , ,

Description

Harbinger Mountain Fog (TQZ 2304T) is a glue-down luxury vinyl tile from the Harbinger The Quiet Zone collection with a built-in 1.5mm IXPE acoustic underlay (IIC 72 / STC 70), available at PI Floor & Blinds in Victoria, BC. It has a 0.55mm wear layer and Harbinger 4S coating for scratch, scuff and stain resistance, with realistic embossed textures. Suitable for all interior floor surfaces above, on or below grade.

Dimensions 16″ x 32″ Tile
Box Coverage 35.56 sq.ft.
Thickness 4.5mm (3.0mm LVT + 1.5mm IXPE)
Wear Layer 0.55mm
Edge Beveled
Textures Realistic embossing textures allow you to see the grain and knots as evident in real wood
Grade Level Suitable for all interior floor surfaces above, on, or below grade
Acoustic Properties IIC 72 STC 70
Coating Harbinger 4S coating for superior durability, scratch protection, stain and scuff resistance
Application Glue Down

Additional information

Collection

The Quiet Zone
Thickness

4.5mm (3.0mm LVT + 1.5mm IXPE)
Wear Layer

0.55mm
Size

16" x 32" Tile
Sq Ft per Box

35.56 sq ft
Edge

Beveled
Installation

Glue Down
Construction

High pressure heat laminated
Coating

Harbinger 4S coating for superior durability, scratch protection, stain and scuff resistance
Grade Level

Suitable for all interior floor surfaces above, on, or below grade
Acoustic Properties

IIC 72 STC 70

Reviews

There are no reviews yet.

Be the first to review “Mountain Fog”

Your email address will not be published. Required fields are marked *

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

More from this collection

Free Estimate