Misty Gray Zen Tile vinyl flooring by Cyrus
Misty Gray Zen Tile vinyl flooring by Cyrus, view 2
Misty Gray Zen Tile vinyl flooring by Cyrus, view 3

Misty Gray

Get a Free Estimate

Misty Gray: Cyrus Zen Tile collection 7.5mm SPC flooring with pad attached, 24″ x 12″ x 0.3″, 4-side Unilin Clic Lock System installation. 12 sq ft per box.

Coverage calculator1 box covers 12 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: CY-ZT001 Category: Brand:

Description

Misty Gray from the Cyrus Zen Tile collection by HTBC Flooring is a 7.5mm spc flooring with pad attached.

  • Product Type: 7.5mm SPC flooring with pad attached
  • Plank Size: 24″ x 12″ x 0.3″ / 609.6mm x 304.8mm x 7.5mm
  • Surface: 20mil wear layer, Texture Embossed, UV Coating
  • Product Features: 6mm + 1.5mm EVA underpad ( STC 72, IIC 73 ) / 100% Waterproof, Stain Resistant / Anti-Slip, Phthalate-Free, Low Gloss Finish
  • Installation: 4-side Unilin Clic Lock System
  • Commercial Warranty: 5 years
  • Residential Warranty: Lifetime (limited)
  • Certifications: Carb 2, FloorScore
  • Pattern Repeat: 8 planks non-repeat
  • Pieces per Carton: 6
  • Square feet per Carton: 12
  • Weight per Carton (LB): 31.4

Additional information

Collection

Zen Tile
Product Type

7.5mm SPC flooring with pad attached
Plank Size

24" x 12" x 0.3" / 609.6mm x 304.8mm x 7.5mm
Surface

20mil wear layer, Texture Embossed, UV Coating
Features

6mm + 1.5mm EVA underpad ( STC 72, IIC 73 ) / 100% Waterproof, Stain Resistant / Anti-Slip, Phthalate-Free, Low Gloss Finish
Installation

4-side Unilin Clic Lock System
Commercial Warranty

5 years
Residential Warranty

Lifetime (limited)
Certifications

Carb 2, FloorScore
Pattern Repeat

8 planks non-repeat
Coverage / Box

12 sq ft
Radiant Heat

Yes – approved for use over radiant heat (see supplier installation guide)
Thickness

6 mm

What Victoria homeowners say

★★★★★5.0 on Google (194 reviews)

“Zafer is incredibly professional, genuine, and kind. He takes his time to make sure you're satisfied with every detail and is so easy to communicate with - usually responding right away. Very lucky...”

David K.

“Zafer replaced our living room, dining room and kitchen floors and did an awesome job! All the old floors were of different materials and different heights, but he levelled them and removed all...”

Jeanette J.

“I used PI Floor Company to replace my apartment carpet by laminate. Everything was done well, fast and with high quality! The price was reasonable. I strongly recommend this company. Alexander”

Alexander R.
See all 194 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

More from this collection

Free Estimate
Visitors: 18,102

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy