Pi Blinds - Window Coverings
Claystone engineered hardwood by Pindar Floors

Claystone

Get a Free Estimate

Claystone: Pindar Floors Elements engineered hardwood, Select grade ash, 7-1/2″ wide x 74″ long, 14mm thick, 3mm veneer, brushed, UV-cured polyurethane finish, radiant heat approved.

SKU: PINDAR-EM002 Category: Brand:

Description

Claystone from the Pindar Floors Elements collection (distributed by HTBC Flooring) is an engineered hardwood floor in Ash.

  • Collection: Elements
  • Species: Ash
  • Grade: Select grade
  • Product Type: Engineered Hardwood
  • Size: 7-1/2″ wide x 74″ long, 14mm thick
  • Veneer (Wear Layer): 3mm
  • Surface: Brushed, wide plank
  • Length: 75% fixed length planks
  • Finish: High-performance polyurethane with UV coating finish
  • Radiant Heat: Radiant heat approved
  • Character: Low colour variation, low natural characteristics containing minimal knots
  • Warranty: Lifetime residential structural warranty, 30-years residential wear warranty
  • Supplier Code: EM002

Real wood: colour and grain vary naturally between planks. Warranty terms are set by the manufacturer; ask us for the full warranty document.

Additional information

Collection

Elements
Species

Ash
Grade

Select grade
Product Type

Engineered Hardwood
Size

7-1/2" wide x 74" long, 14mm thick
Veneer (Wear Layer)

3mm
Surface

Brushed, wide plank
Length

75% fixed length planks
Finish

High-performance polyurethane with UV coating finish
Radiant Heat

Radiant heat approved
Character

Low colour variation, low natural characteristics containing minimal knots
Warranty

Lifetime residential structural warranty, 30-years residential wear warranty
Supplier Code

EM002

Reviews

There are no reviews yet.

Be the first to review “Claystone”

Your email address will not be published. Required fields are marked *

What Victoria homeowners say

★★★★★5.0 on Google (192 reviews)

“Jack was very helpful and easy to deal with, flooring was delivered on time. I highly recommend PI flooring, quality products and reasonably priced”

Richard T.

“Got some new flooring installed from Pi floors, as well as floor repairs. Zafer is very friendly, communicative, knowledgeable, and helpful. He does his best to make his customers happy and I love...”

Aman D.

“PI Flooring recently isstalled Vinyl Click type flooring in a rental property I manage for Raven Property Management. They were efficient from the beginnig, following up on quotes, helping to choose...”

Rick A.
See all 192 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

More from this collection

Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy