Basalt

Basalt: Signature Acoustic Click waterproof vinyl tile, 16″ x 32″, 7.5 mm with attached 1.5 mm cork, 0.55 mm (22 mil) wear layer. IIC 73 / STC 68.

Coverage calculator1 box covers 21.29 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: SAC 55009S Category: Brand:

Description

Basalt is part of Harbinger’s Signature Acoustic Click collection, a premium waterproof floating floor built to withstand the rigors of daily life. Each 16″ x 32″ tile is 7.5 mm thick (6.0 mm LVT + 1.5 mm attached cork backing) with a 0.55 mm (22 mil) wear layer and high pressure heat laminated construction. Harbinger 4S coating provides superior durability, scratch protection, and stain and scuff resistance. Realistic embossed stone-look surface texture. Painted bevel edges and the Välinge 5G locking system make installation quick and secure. Suitable for all interior floor surfaces above, on or below grade. Acoustic rating IIC 73 / STC 68. 21.29 sq. ft. per box.

Additional information

Color

Basalt

Thickness

7.5 mm (6.0 mm core + 1.5 mm cork)

Wear Layer

0.55 mm (22 mil)

Tile Size

16" x 32"

Sq Ft per Box

21.29 sq. ft.

Finish

Harbinger 4S coating

Edge

Painted bevel

Installation

Floating, click (Välinge 5G); all levels (above, on or below grade)

Collection

Signature Acoustic Click

Construction

High pressure heat laminated LVT with attached 1.5 mm cork

Water Resistance

Waterproof

Acoustic Rating

IIC 73 / STC 68

Warranty

Limited lifetime residential / 20-year commercial (Manufacturer's limited warranty. The manufacturer's written warranty terms and conditions apply and take precedence.)

Certifications

FloorScore certified; NSF/ANSI 332 Platinum (brand-level)

Radiant Heat

Suitable; radiant heat temperature must not exceed 29.4°C (85°F) (supplier installation guide)

What Victoria homeowners say

★★★★★5.0 on Google (194 reviews)

“Zafer was fast and extremely professional. I have used many companies in the past and this was one of my best experiences! We had luxury vinyl plank installed in our medical office. Highly...”

Scott M.

“Today the owner Zafer, of PI Floor arrived at my home to lay some new flooring in my bathroom.....Firstly want to acknowledge his punctuality, and of course his very pleasant personality.....I'm...”

hilary H.

“We highly, highly recommend PI Floor & Blinds. They did an excellent and incredibly speedy job installing new vinyl flooring in our upstairs, stairs, and basement. Zafer and the entire team were...”

S R.
See all 194 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate
Visitors: 7,158

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy