Anvil Nautilus vinyl flooring by Cyrus
Anvil Nautilus vinyl flooring by Cyrus, room scene

Anvil

Get a Free Estimate

Anvil: Cyrus Nautilus collection 7mm SPC flooring with pad attached, 60″ x 7″ x 0.28″, 4-side Unilin Clic Lock System installation. 17.91 sq ft per box.

Coverage calculator1 box covers 17.91 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: CY-NT001 Category: Brand:

Description

Anvil from the Cyrus Nautilus collection by HTBC Flooring is a 7mm spc flooring with pad attached.

  • Product Type: 7mm SPC flooring with pad attached
  • Plank Size: 60″ x 7″ x 0.28″ / 1524mm x 180mm x 7mm
  • Surface: 12mil wear layer, Texture Embossed, UV Coating
  • Product Features: 5.5mm + 1.5mm EVA under pad ( STC 72, IIC 73 ) / 100% Waterproof, Stain Resistant / Anti-Slip, Phthalate-Free, Low Gloss Finish
  • Installation: 4-side Unilin Clic Lock System
  • Commercial Warranty: 5 years
  • Residential Warranty: Lifetime (limited)
  • Certifications: Floors Score
  • Pattern Repeat: 6 planks non-repeat
  • Pieces per Carton: 6
  • Square feet per Carton: 17.91
  • Weight per Carton (LB): 43

Additional information

Collection

Nautilus
Product Type

7mm SPC flooring with pad attached
Plank Size

60" x 7" x 0.28" / 1524mm x 180mm x 7mm
Surface

12mil wear layer, Texture Embossed, UV Coating
Features

5.5mm + 1.5mm EVA under pad ( STC 72, IIC 73 ) / 100% Waterproof, Stain Resistant / Anti-Slip, Phthalate-Free, Low Gloss Finish
Installation

4-side Unilin Clic Lock System
Commercial Warranty

5 years
Residential Warranty

Lifetime (limited)
Certifications

Floors Score
Pattern Repeat

6 planks non-repeat
Coverage / Box

17.91 sq ft
Radiant Heat

Yes – approved for use over radiant heat (see supplier installation guide)
Thickness

5.5 mm

What Victoria homeowners say

★★★★★5.0 on Google (194 reviews)

“I was impressed with PI Floors from the moment we entered the shop. Zafer was friendly and helpful, and he understood that we were working on a budget. He was professional throughout the process, and...”

Paula R.

“Great experience working with Zafer at PI Floors... to the point I felt compelled to write a review. He showed up on time for a quote appointment during heavy snow and had knowledgeable advice for...”

Tyler G.

“We love the flooring we purchased from PI flooring! Zafir was awesome to deal with, always responsive to our questions. Would recommend!”

Bo Y.
See all 194 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

More from this collection

Free Estimate
Visitors: 18,120

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy