Angola

Harbinger vinyl flooring in Angola. 3.0mm thick, 0.55mm wear layer, 16″ x 32″ Tile. Glue Down installation, beveled. 35.56 sq ft per box.

Coverage calculator1 box covers 35.56 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: HCP 88055T Categories: , ,

Description

Harbinger Angola (HCP 88055T) is a glue-down luxury vinyl tile from the Harbinger Craftsman collection, available at PI Floor & Blinds in Victoria, BC. It has a 0.55mm wear layer and Harbinger 4S coating for scratch, scuff and stain resistance, with realistic embossed textures. Suitable for all interior floor surfaces above, on or below grade.

Dimensions 16″ x 32″ Tile
Box Coverage 35.56 sq.ft.
Thickness 3.0mm
Wear Layer 0.55mm
Edge Beveled
Construction High pressure heat laminated
Application Glue Down
Coating Harbinger 4S Technology – superior durability, scuff resistance, stain resistance and scratch protection
Textures Realistic embossing textures allow you to see the grain and knots as evident in real wood
Grade Level Suitable for all interior floor surfaces, above, on or below grade

Additional information

Collection

Craftsman

Thickness

3.0mm

Wear Layer

0.55mm

Size

16" x 32" Tile

Sq Ft per Box

35.56 sq ft

Edge

Beveled

Installation

Glue Down

Construction

High pressure heat laminated

Coating

Harbinger 4S Technology – superior durability, scuff resistance, stain resistance and scratch protection

Grade Level

Suitable for all interior floor surfaces, above, on or below grade

Warranty

Limited lifetime residential / 20-year commercial (Manufacturer's limited warranty. The manufacturer's written warranty terms and conditions apply and take precedence.)

Certifications

FloorScore certified; NSF/ANSI 332 Platinum (brand-level)

Radiant Heat

Suitable over radiant heat with supplier-approved adhesive (UZIN KE 66 or KR 430); see supplier glue-down guide

Water Resistance

Resists topical water exposure when properly installed and maintained (per Harbinger warranty)

What Victoria homeowners say

★★★★★5.0 on Google (194 reviews)

“We have had our basement, kitchen and bathroom floors done by the PI team. All projects have turned out fantastic with great workmanship and attention to detail. The team is great at communicating...”

Chris R.

“Unfortunately, we did not succeed finding a floor but we were offered great service. Definitely a place to visit when you are looking for a new floor.”

B V.

“Mr. Zafar from PI floor did an amazing job in our basement. The job has been done professionally, on time and clean . I definitely give him 5 stars and recommend him to anybody who is looking for a...”

Shahnaz A.
See all 194 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate
Visitors: 7,141

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy