Hardwood is the floor many Victoria homeowners picture first: warm underfoot, real wood grain, and a look that suits a century-old Fairfield house as well as a new West Shore townhome. At Pi Floor & Blinds we carry both engineered and solid hardwood, and our own crews install both. Visit our showroom at 100-4500 W Saanich Rd, Victoria, to compare full boards in real light before you choose.
Engineered or solid hardwood?
Engineered hardwood has a real hardwood wear layer bonded to a layered core. That core makes it more dimensionally stable than solid wood when indoor humidity changes, so it is the usual choice over concrete, in many condos, and over many radiant-heat systems, always following the manufacturer’s instructions. Depending on the thickness of the wear layer, many engineered floors can be sanded and refinished later in their life by a refinishing specialist.
Solid hardwood is one piece of wood from top to bottom. It is nailed down over a wood subfloor, so it suits above-grade rooms such as living rooms, dining rooms, bedrooms and hallways, and a refinishing specialist can sand and refinish it several times over its life. Pi Floor supplies and installs hardwood; we do not offer sanding or refinishing.
| Engineered hardwood | Solid hardwood | |
|---|---|---|
| Construction | Real wood wear layer on a layered core | Solid wood throughout |
| Over concrete or below grade | Often suitable; check the product | Not recommended |
| Condos | Common, with the underlay the strata requires | Less common |
| Installation methods | Floating, glue-down or nail-down | Nail-down over a wood subfloor |
| Refinishing later (by a specialist) | Depends on the wear layer | Possible several times |
For a deeper comparison, read engineered vs solid hardwood in Victoria and the types of hardwood installation.
Hardwood brands at our Victoria showroom
We carry engineered hardwood from Goodfellow, Pravada, ETM, Twelve Oaks, Pindar Floors and Vidar Flooring, and solid hardwood from Goodfellow, including wide-plank oak and a range of stains and finishes. Browse engineered hardwood and solid hardwood online, then compare samples in store or take them home.
Hardwood and Victoria’s coastal climate
Wood expands and contracts as indoor humidity changes between our damp winters and drier summers. Let the boards acclimatise for the time the manufacturer specifies, keep indoor humidity steady, and leave the expansion gaps the installation instructions call for. Engineered hardwood is the safer choice where moisture or temperature swings are a concern. We check subfloor flatness and moisture when we measure, so any preparation is in your quote.
How we install hardwood
- Free measure and subfloor check. We measure each room and check the subfloor for flatness and moisture.
- Product and underlay. We confirm the product suits the room and choose the right underlay, including sound-rated underlay for condos where the strata requires it.
- Preparation. We remove the old floor and level or repair the subfloor where needed.
- Installation. Our crews install solid hardwood by nail-down, and engineered hardwood by floating, glue-down or nail-down methods, as the product requires.
- Finishing. Stairs, trims and transitions are fitted, then we walk the floor with you.
Our installation crews are covered by WorkSafeBC and our liability insurance, and every installation comes with a 1-year installation warranty that covers our installation workmanship (product warranties come from the manufacturer). See flooring installation in Victoria for the full process.
What does hardwood flooring cost in Victoria?
At Pi Floor, supply and installation typically cost CAD $7–10 per square foot. Hardwood often sits toward the upper end of that range, depending on the species, plank width, finish, subfloor preparation and stairs. Read our flooring cost guide for Victoria or book a free estimate for a written quote.
Caring for a hardwood floor
Use felt pads under furniture, sweep or vacuum grit often, and clean with a hardwood-safe cleaner on a barely damp mop. Never use a soaking-wet mop or a steam cleaner. Wipe up spills promptly and put mats at entrances. More tips: how to care for hardwood floors.
Hardwood flooring FAQ
Yes. The top layer is real hardwood. The core underneath is layered wood or a wood composite, which makes the plank more stable when humidity changes.
Yes. Pi Floor crews install solid hardwood by nail-down over a wood subfloor, and engineered hardwood by floating, glue-down or nail-down methods, depending on the product and the room.
Engineered hardwood can work in many kitchens and in some basements if the product allows it and moisture is controlled. Solid hardwood is not recommended below grade. For wet areas, waterproof vinyl plank is often the better choice.
Usually, if you use the underlay your strata requires. Bring your strata bylaws to the estimate and we will match the product and underlay to your building.
Our installation work comes with a 1-year installation warranty that covers our installation workmanship. The flooring itself is covered by the manufacturer’s product warranty.
Yes. Visit our showroom at 100-4500 W Saanich Rd, Victoria, Monday to Friday 9:30 am to 5:00 pm or Saturday 11:00 am to 4:00 pm, or ask about taking samples home.
See more of our work
Browse flooring projects across Greater Victoria, or watch one of our installation videos below.





