Cirrus

Harbinger vinyl flooring in Cirrus. 4.5mm (3.0mm LVT + 1.5mm IXPE) thick, 0.55mm wear layer, 7.36“ x 48.3″ Plank. Glue Down installation, beveled. 24.69 sq ft per box.

Coverage calculator1 box covers 24.69 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

Description

Dimensions 12″ x 24″ Tile
Thickness 4.5mm (3.0mm LVT + 1.5mm IXPE)
Edge Bevel
Application 4s Technology provides superior durability, scuff resistance, stain resistance and scratch protection
Textures Realistic embossing textures allow you to see the grain and knots as evident in real wood
Grade Level Suitable for all interior floor surfaces above, on, or below grade
Acoustic Properties IIC 72 STC 70

Additional information

color

Light Brown

Thickness

4.5mm (3.0mm LVT + 1.5mm IXPE)

Wear Layer

0.55mm

Plank Size

7.36“ x 48.3" Plank

Sq Ft per Box

24.69 sq.ft.

Finish

Harbinger 4S coating for superior durability / scratch protection / stain and scuff resistance

Edge

Beveled

Installation

Glue Down

Construction

High pressure heat laminated

Sound Rating

IIC 72 STC 70

Warranty

Limited lifetime residential / 20-year commercial (Manufacturer's limited warranty. The manufacturer's written warranty terms and conditions apply and take precedence.)

Certifications

FloorScore certified; NSF/ANSI 332 Platinum (brand-level)

Radiant Heat

Suitable over radiant heat with supplier-approved adhesive (UZIN KE 66 or KR 430); see supplier glue-down guide

What Victoria homeowners say

★★★★★5.0 on Google (194 reviews)

“PI Flooring recently isstalled Vinyl Click type flooring in a rental property I manage for Raven Property Management. They were efficient from the beginnig, following up on quotes, helping to choose...”

Rick A.

“Jack was very helpful and easy to deal with, flooring was delivered on time. I highly recommend PI flooring, quality products and reasonably priced”

Richard T.

“Got some new flooring installed from Pi floors, as well as floor repairs. Zafer is very friendly, communicative, knowledgeable, and helpful. He does his best to make his customers happy and I love...”

Aman D.
See all 194 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate
Visitors: 7,146

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy