Beachcomber

Harbinger vinyl flooring in Beachcomber. 3.0mm thick, 0.55mm wear layer, 7.36″ x 48.3″ Plank. Glue Down installation, beveled. 29.62 sq ft per box.

Coverage calculator1 box covers 29.62 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

Categories: , , Brand:

Description

Dimension 7.36″x48.3″ Plank
Thickness 3.0mm
Wear Layer 0.55mm
Edge Bevel
Construction High pressure heat laminated
Application Heavy commercial glue down
Coating 4S Technology – superior durability, scuff resistance, stain resistance and scratch protection
Textures Realistic embossing textures allow you to see the grain and knots as evident in real wood
Grade

Level

Suitable for all interior floor surfaces, above, on or below grade

Additional information

color

Light Brown

Thickness

3.0mm

Wear Layer

0.55mm

Plank Size

7.36" x 48.3" Plank

Sq Ft per Box

29.62 sq.ft.

Finish

Harbinger 4S coating for superior durability / scratch protection / stain and scuff resistance

Edge

Beveled

Installation

Glue Down

Construction

High pressure heat laminated

Warranty

Limited lifetime residential / 20-year commercial (Manufacturer's limited warranty. The manufacturer's written warranty terms and conditions apply and take precedence.)

Certifications

FloorScore certified; NSF/ANSI 332 Platinum (brand-level)

Radiant Heat

Suitable over radiant heat with supplier-approved adhesive (UZIN KE 66 or KR 430); see supplier glue-down guide

Water Resistance

Resists topical water exposure when properly installed and maintained (per Harbinger warranty)

What Victoria homeowners say

★★★★★5.0 on Google (194 reviews)

“These guys were amazing to work with today- fast to respond, helpful on arrival, not to mention a ridiculous deal on flooring! Highly recommend as a way to support local!”

Cody C.

“Wonderful service and excellent, speedy communication. Zafer installed a stair runner only a couple of days after I first reached out. He did a great job and I’d definitely reach out again for future...”

Laura P.

“We are thrilled to have found Pi flooring. We called Zafer on a Tuesday, looking for a particular Harbinger flooring. He ordered it that day, and it arrived two days later. He was even able to get...”

Laurie B.
See all 194 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate
Visitors: 7,146

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy