Pi Blinds - Window Coverings
Visionary engineered hardwood by Pindar Floors

Visionary

Get a Free Estimate

Visionary: Pindar Floors Valor engineered hardwood, ABCD grade white oak, 7-1/2″ wide x 74″ long, 12mm thick, 1.2mm veneer, brushed, UV-cured polyurethane finish, radiant heat approved.

SKU: PINDAR-VC014 Category: Brand:

Description

Visionary from the Pindar Floors Valor collection (distributed by HTBC Flooring) is an engineered hardwood floor in White Oak.

  • Collection: Valor
  • Species: White Oak
  • Grade: ABCD grade
  • Product Type: Engineered Hardwood
  • Size: 7-1/2″ wide x 74″ long, 12mm thick
  • Veneer (Wear Layer): 1.2mm
  • Surface: Brushed, wide plank
  • Length: Random length planks
  • Finish: High-performance polyurethane with UV coating finish
  • Radiant Heat: Radiant heat approved
  • Character: Medium to high colour variation and natural characteristics
  • Warranty: Lifetime residential structural warranty, 30-years residential wear warranty
  • Supplier Code: VC014

Real wood: colour and grain vary naturally between planks. Warranty terms are set by the manufacturer; ask us for the full warranty document.

Additional information

Collection

Valor
Species

White Oak
Grade

ABCD grade
Product Type

Engineered Hardwood
Size

7-1/2" wide x 74" long, 12mm thick
Veneer (Wear Layer)

1.2mm
Surface

Brushed, wide plank
Length

Random length planks
Finish

High-performance polyurethane with UV coating finish
Radiant Heat

Radiant heat approved
Character

Medium to high colour variation and natural characteristics
Warranty

Lifetime residential structural warranty, 30-years residential wear warranty
Supplier Code

VC014

Reviews

There are no reviews yet.

Be the first to review “Visionary”

Your email address will not be published. Required fields are marked *

What Victoria homeowners say

★★★★★5.0 on Google (192 reviews)

“Unfortunately, we did not succeed finding a floor but we were offered great service. Definitely a place to visit when you are looking for a new floor.”

B V.

“Mr. Zafar from PI floor did an amazing job in our basement. The job has been done professionally, on time and clean . I definitely give him 5 stars and recommend him to anybody who is looking for a...”

Shahnaz A.

“We have had our basement, kitchen and bathroom floors done by the PI team. All projects have turned out fantastic with great workmanship and attention to detail. The team is great at communicating...”

Chris R.
See all 192 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

More from this collection

Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy