Pi Blinds - Window Coverings
Modena engineered hardwood by Pindar Floors

Modena

Get a Free Estimate

Modena: Pindar Floors Nordic Elegance engineered hardwood, Select grade white oak, 7-1/2″ wide x 74″ long, 14mm thick, 3mm veneer, brushed, UV-cured polyurethane finish, radiant heat approved.

SKU: PINDAR-NE011 Category: Brand:

Description

Modena from the Pindar Floors Nordic Elegance collection (distributed by HTBC Flooring) is an engineered hardwood floor in White Oak.

  • Collection: Nordic Elegance
  • Species: White Oak
  • Grade: Select grade
  • Product Type: Engineered Hardwood
  • Size: 7-1/2″ wide x 74″ long, 14mm thick
  • Veneer (Wear Layer): 3mm
  • Surface: Brushed, wide plank
  • Length: 75% fixed length planks
  • Finish: High-performance polyurethane with UV coating finish
  • Radiant Heat: Radiant heat approved
  • Character: Medium colour variation, low natural characteristics containing minimal knots
  • Warranty: Lifetime residential structural warranty, 30-years residential wear warranty
  • Supplier Code: NE011

Real wood: colour and grain vary naturally between planks. Warranty terms are set by the manufacturer; ask us for the full warranty document.

Additional information

Collection

Nordic Elegance
Species

White Oak
Grade

Select grade
Product Type

Engineered Hardwood
Size

7-1/2" wide x 74" long, 14mm thick
Veneer (Wear Layer)

3mm
Surface

Brushed, wide plank
Length

75% fixed length planks
Finish

High-performance polyurethane with UV coating finish
Radiant Heat

Radiant heat approved
Character

Medium colour variation, low natural characteristics containing minimal knots
Warranty

Lifetime residential structural warranty, 30-years residential wear warranty
Supplier Code

NE011

Reviews

There are no reviews yet.

Be the first to review “Modena”

Your email address will not be published. Required fields are marked *

What Victoria homeowners say

★★★★★5.0 on Google (192 reviews)

“Excellent price for an excellent product. Representative went out of his way to ensure our satisfaction and made time on his day off for us to come purchase our flooring”

Lori C.

“Zafer, the owner, is a pleasure to work with and to have in our home. Our flooring job was done from choosing the wood product to full installation in two weeks! Our designer and contractor were in...”

Jen M.

“Great service, great support, quick replies to inquiries, we replaced the stairs flooring. We have another project to replace the bathrooms flooring and we are going to use them again.”

John L.
See all 192 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

More from this collection

Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy