Night Owl engineered hardwood by Vidar Flooring

Night Owl

Get a Free Estimate

Night Owl: Vidar Herringbone engineered hardwood, American White Oak, 4-3/4″ & 5″ x 9/16″ (119mm or 125mm x 14mm), 3mm veneer, wirebrushed BONA UV lacquered ultra matte.

SKU: VIDAR-HB-05 Category: Brand:

Description

Night Owl from the Vidar Design Flooring Herringbone collection is an engineered hardwood floor in American White Oak.

  • Collection: Herringbone
  • Species: American White Oak
  • Product Type: Engineered Hardwood
  • Construction: Engineered Multi-layer Hardwood
  • Size: 4-3/4″ & 5″ x 9/16″ (119mm or 125mm x 14mm)
  • Length: Fixed length
  • Veneer (Wear Layer): 3mm dry sawn wood layer
  • Grade: Select
  • Surface: Wirebrushed
  • Finish: BONA UV Lacquered, Ultra Matte
  • Bevel: Micro bevel
  • Radiant Heat: Hydronic radiant heat compatible
  • Janka Hardness: 1320 (oak) / 1010 (walnut)
  • Installation: Tongue and groove profile, nail down installation with glue assist is recommended
  • Certifications: FloorScore, CARB II, FSC, CE
  • Warranty: Limited 35 years finish warranty, lifetime structural warranty
  • Coverage / Box: 15.24, 17.93 or 20.18 sq ft per box
  • Box Weight: 48-56 lbs
  • Spec Sheet: Specification sheet (PDF)

Real wood: colour and grain vary naturally between planks; supplier photos show Select and Better grade.

Additional information

Collection

Herringbone
Species

American White Oak
Product Type

Engineered Hardwood
Construction

Engineered Multi-layer Hardwood
Size

4-3/4" & 5" x 9/16" (119mm or 125mm x 14mm)
Length

Fixed length
Veneer (Wear Layer)

3mm dry sawn wood layer
Grade

Select
Surface

Wirebrushed
Finish

BONA UV Lacquered, Ultra Matte
Bevel

Micro bevel
Radiant Heat

Hydronic radiant heat compatible
Janka Hardness

1320 (oak) / 1010 (walnut)
Installation

Tongue and groove profile, nail down installation with glue assist is recommended
Certifications

FloorScore, CARB II, FSC, CE
Warranty

Limited 35 years finish warranty, lifetime structural warranty
Coverage / Box

15.24, 17.93 or 20.18 sq ft per box
Box Weight

48-56 lbs

What Victoria homeowners say

★★★★★5.0 on Google (192 reviews)

“I was very pleased with the carpet repair completed for me by PI Floors and Blinds! Skilled repair person and excellent service!”

Dr. R.

“We were very pleased with the flooring we purchased and had installed by Pi Floors! There were many samples of flooring to choose from and no pressure to choose quickly. Prices were very competitive...”

Cheryl T.

“PI flooring did an amazing job.They we’re professional and hard workers .By noon my floors were done.They are very kind people.I would highly recommend PI flooring”

Joanne J.
See all 192 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

More from this collection

Free Estimate
Visitors: 18,013

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy