Ravine

Ravine: Biyork HydroGen 7 collection 7mm SPC Rigid Core Vinyl Plank, 60″ x 9″ x 7mm, 20 mil / 0.5mm wear layer, 100% waterproof, Uniclic angle/angle click (I4F), floating installation. 22.44 sq ft per box.

Coverage calculator1 box covers 22.44 sq ft

Room area (sq ft) Add 10% for waste (cuts and pattern matching)

Total area needed-

Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: BY-H7-06 Category: HydroGen 7 Brand: Biyork

Description

Ravine from the Biyork HydroGen 7 collection by Biyork Floors is a 7mm spc rigid core vinyl plank.

Product Type: 7mm SPC Rigid Core Vinyl Plank
Plank Size: 60″ x 9″ x 7mm / 1524mm x 228mm x 7mm
Surface: Wood Texture, EIR, TrueShield, Pressed Bevel
Wear Layer: 20 mil / 0.5mm
Underlayment: 1.5mm IXPE (UnderTone) attached
Features: 100% waterproof, radiant heat compatible (water-based), on/above/below grade, -30 to +50 C stability, 80 x 80 ft max area without transition
Installation: Uniclic angle/angle click (I4F), floating
Commercial Warranty: 10 years
Residential Warranty: 40 years
Certifications: FloorScore, EPD verified
Coverage / Box: 22.44 sq ft (6 pieces)

Additional information

Collection	HydroGen 7
Product Type	7mm SPC Rigid Core Vinyl Plank
Plank Size	60" x 9" x 7mm / 1524mm x 228mm x 7mm
Surface	Wood Texture, EIR, TrueShield, Pressed Bevel
Wear Layer	20 mil / 0.5mm
Underlayment	1.5mm IXPE (UnderTone) attached
Features	100% waterproof, radiant heat compatible (water-based), on/above/below grade, -30 to +50 C stability, 80 x 80 ft max area without transition
Installation	Uniclic angle/angle click (I4F), floating
Commercial Warranty	10 years
Residential Warranty	40 years
Certifications	FloorScore, EPD verified
Coverage / Box	22.44 sq ft (6 pieces)

Reviews

There are no reviews yet.

Be the first to review “Ravine”

What Victoria homeowners say

★★★★★5.0 on Google (188 reviews)

“Pi floors exceeded our expectations in every way!! Excellent communication, polite, very fair prices, speedy work with stellar workmanship. Definitely earned my 5 stars and would use them again...”

colleen B.

“I had an excellent experience working with Zafer at PI floors. He took the time to discuss our options and I felt informed throughout the process. Our subfloor had a few cracks that we discovered...”

Brooklynn T.

“Hi all, I was referred to Pi Flooring from a friend after flooding happened at my hime in Victoria. They promptly came and measured the next morning. After being presently with lots of options I...”

Vancouver S.

See all 188 Google reviews →

Installation & care

Before installation

Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.

Installation tips

Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
Mix planks from several boxes as you lay them for a natural look.
Always follow the installation instructions and warranty terms for this specific product.

Care and maintenance

Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
Wipe up spills quickly and use felt pads under furniture legs.
Use door mats at entrances to keep grit from scratching the surface.

Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

Ravine

Description

Additional information

Reviews

What Victoria homeowners say

Installation & care

More from this collection

Sable

Sonnet

Ironvale