Rustic Walnut

Rustic Walnut: Cyrus Oceanus collection 8mm SPC flooring with pad attached, 60″ x 9″ x 5/16″, Angle to Angle installation. 18.7 sq ft per box.

Coverage calculator1 box covers 18.7 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: CY-OS010 Category: Brand:

Description

Rustic Walnut from the Cyrus Oceanus collection by HTBC Flooring is a 8mm spc flooring with pad attached.

  • Product Type: 8mm SPC flooring with pad attached
  • Plank Size: 60″ x 9″ x 5/16″ / 1524mm x 228mm x 8mm
  • Surface: 20mil Wear Layer, Wood grain, Embossed
  • Product Features: 6mm + 2mm IXPE underpad ( STC 74, IIC 75 ) / 100% Waterproof, Stain Resistant / Anti-Slip, Phthalate-Free
  • Installation: Angle to Angle
  • Commercial Warranty: 5 years
  • Residential Warranty: Lifetime (limited)
  • Certifications: Carb 2, FloorScore
  • Pattern Repeat: 5 planks non-repeat
  • Pieces per Carton: 5
  • Square feet per Carton: 18.7
  • Weight per Carton (LB): 49

Additional information

Collection

Oceanus

Product Type

8mm SPC flooring with pad attached

Plank Size

60" x 9" x 5/16" / 1524mm x 228mm x 8mm

Surface

20mil Wear Layer, Wood grain, Embossed

Features

6mm + 2mm IXPE underpad ( STC 74, IIC 75 ) / 100% Waterproof, Stain Resistant / Anti-Slip, Phthalate-Free

Installation

Angle to Angle

Commercial Warranty

5 years

Residential Warranty

Lifetime (limited)

Certifications

Carb 2, FloorScore

Pattern Repeat

5 planks non-repeat

Coverage / Box

18.7 sq ft

Radiant Heat

Yes – approved for use over radiant heat (see supplier installation guide)

What Victoria homeowners say

★★★★★5.0 on Google (192 reviews)

“I had an excellent experience working with Zafer at PI floors. He took the time to discuss our options and I felt informed throughout the process. Our subfloor had a few cracks that we discovered...”

Brooklynn T.

“Hi all, I was referred to Pi Flooring from a friend after flooding happened at my hime in Victoria. They promptly came and measured the next morning. After being presently with lots of options I...”

Vancouver S.

“Pi floors exceeded our expectations in every way!! Excellent communication, polite, very fair prices, speedy work with stellar workmanship. Definitely earned my 5 stars and would use them again...”

colleen B.
See all 192 Google reviews →

Seen in our projects

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate
Visitors: 18,009

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy