Madagascar

Harbinger vinyl flooring in Madagascar. 3.0mm thick, 0.55mm wear layer, 16″ x 32″ Tile. Glue Down installation, beveled. 35.56 sq ft per box.

Coverage calculator1 box covers 35.56 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: HCP 88044T Categories: , ,

Description

Harbinger Madagascar (HCP 88044T) is a glue-down luxury vinyl tile from the Harbinger Craftsman collection, available at PI Floor & Blinds in Victoria, BC. It has a 0.55mm wear layer and Harbinger 4S coating for scratch, scuff and stain resistance, with realistic embossed textures. Suitable for all interior floor surfaces above, on or below grade.

Dimensions 16″ x 32″ Tile
Box Coverage 35.56 sq.ft.
Thickness 3.0mm
Wear Layer 0.55mm
Edge Beveled
Construction High pressure heat laminated
Application Glue Down
Coating Harbinger 4S Technology – superior durability, scuff resistance, stain resistance and scratch protection
Textures Realistic embossing textures allow you to see the grain and knots as evident in real wood
Grade Level Suitable for all interior floor surfaces, above, on or below grade

Additional information

Collection

Craftsman

Thickness

3.0mm

Wear Layer

0.55mm

Size

16" x 32" Tile

Sq Ft per Box

35.56 sq ft

Edge

Beveled

Installation

Glue Down

Construction

High pressure heat laminated

Coating

Harbinger 4S Technology – superior durability, scuff resistance, stain resistance and scratch protection

Grade Level

Suitable for all interior floor surfaces, above, on or below grade

Warranty

Limited lifetime residential / 20-year commercial (Manufacturer's limited warranty. The manufacturer's written warranty terms and conditions apply and take precedence.)

Certifications

FloorScore certified; NSF/ANSI 332 Platinum (brand-level)

Radiant Heat

Suitable over radiant heat with supplier-approved adhesive (UZIN KE 66 or KR 430); see supplier glue-down guide

Water Resistance

Resists topical water exposure when properly installed and maintained (per Harbinger warranty)

What Victoria homeowners say

★★★★★5.0 on Google (194 reviews)

“A great local flooring and blinds store. Friendly team and excellent selection. Wishing them continued success!”

Matt E.

“Not yet fully arrange, but couldn’t wait to send my THANKS to Zafir and his fabulous team! They are so fast and very experienced with their job. It’s like magic. They do their job very diligently and...”

Jenny H.

“PI Flooring did a small job for us today installing laminate flooring. They responded very quickly when we asked for an estimate and also did the actual job promptly. Quality of the work was...”

Jim R.
See all 194 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate
Visitors: 7,146

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy