Rosa

Rosa: Floor Tek Summit collection 7.5mm Rigid Core Vinyl Plank, 60″ x 9″ x 7.5mm, 0.5mm(20 mil) wear layer, EVA underlay pad pre-attached underlay, click floating. 18.70 sq ft per box.

Coverage calculator1 box covers 18.7 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: FT-SUM-06 Category: Brand:

Description

Rosa from the Floor Tek Summit collection is a 7.5mm rigid core vinyl plank.

  • Product Type: 7.5mm Rigid Core Vinyl Plank
  • Plank Size: 60″ x 9″ x 7.5mm
  • Surface: Surface Embossed
  • Wear Layer: 0.5mm(20 mil)
  • Underlayment: EVA underlay pad pre-attached
  • Installation: Click Floating
  • Commercial Warranty: 10 Years Commercial
  • Residential Warranty: Life Time Residential
  • Coverage / Box: 18.70 sq ft

Additional information

Collection

Summit

Product Type

7.5mm Rigid Core Vinyl Plank

Plank Size

60" x 9" x 7.5mm

Surface

Surface Embossed

Wear Layer

0.5mm(20 mil)

Underlayment

EVA underlay pad pre-attached

Installation

Click Floating

Commercial Warranty

10 Years Commercial

Residential Warranty

Life Time Residential

Coverage / Box

18.70 sq ft

Reviews

There are no reviews yet.

Be the first to review “Rosa”

Your email address will not be published. Required fields are marked *

What Victoria homeowners say

★★★★★5.0 on Google (188 reviews)

“Zafer, the owner, is a pleasure to work with and to have in our home. Our flooring job was done from choosing the wood product to full installation in two weeks! Our designer and contractor were in...”

Jen M.

“Great service, great support, quick replies to inquiries, we replaced the stairs flooring. We have another project to replace the bathrooms flooring and we are going to use them again.”

John L.

“Excellent price for an excellent product. Representative went out of his way to ensure our satisfaction and made time on his day off for us to come purchase our flooring”

Lori C.
See all 188 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy