Pearl Glow

Pearl Glow: Cyrus Supreme Wood collection 12mm 500 Hours Water Resistance Laminate, 60″ x 9 1/2 ” x 1/2 “, 4 Side Unilin Click System installation. 23.29 sq ft per box.

Coverage calculator1 box covers 23.29 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: CY-SW007 Category: Brand:

Description

Pearl Glow from the Cyrus Supreme Wood collection by HTBC Flooring is a 12mm 500 hours water resistance laminate.

  • Product Type: 12mm 500 Hours Water Resistance Laminate
  • Plank Size: 60″ x 9 1/2 ” x 1/2 ” / 1515mm x 238mm x 12mm
  • Surface: Premium Ultra Matte Finish / Embossed in Registered (EIR)
  • Product Features: AC5, Wide and Long Board, Liquid Wax Edge / Ultra Matte Finish, 4 Sided Painted Bevel
  • Installation: 4 Side Unilin Click System
  • Commercial Warranty: 10 years
  • Residential Warranty: Lifetime (limited)
  • Certifications: Carb 2, FloorScore
  • Pattern Repeat: 10 planks non-repeating
  • Pieces per Carton: 6
  • Square feet per Carton: 23.29
  • Weight per Carton (LB): 52

Additional information

Collection

Supreme Wood

Product Type

12mm 500 Hours Water Resistance Laminate

Plank Size

60" x 9 1/2 " x 1/2 " / 1515mm x 238mm x 12mm

Surface

Premium Ultra Matte Finish / Embossed in Registered (EIR)

Features

AC5, Wide and Long Board, Liquid Wax Edge / Ultra Matte Finish, 4 Sided Painted Bevel

Installation

4 Side Unilin Click System

Commercial Warranty

10 years

Residential Warranty

Lifetime (limited)

Certifications

Carb 2, FloorScore

Pattern Repeat

10 planks non-repeating

Coverage / Box

23.29 sq ft

Reviews

There are no reviews yet.

Be the first to review “Pearl Glow”

Your email address will not be published. Required fields are marked *

What Victoria homeowners say

★★★★★5.0 on Google (188 reviews)

“Zafer and his team are simply the best! Through every step of the process, they were professional, prompt and communicated clearly. They redid all of the flooring in our home and we are so happy with...”

Christina K.

“Zafer, the owner and installer for our job, was a pleasure to work with. Very friendly and polite. With great attention to detail, will use him again for sure! Highly recommend.”

ben L.

“Zafer did an amazing job on our new floors, he was so accommodating to schedule restraints, and delivered timely and excellent service. Thank you Zafer!”

Genny C.
See all 188 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy