Almond

Almond: Cyrus Maple Essence collection 12mm 100 Hours water resistance laminate, 60″ x 9 1/2 ” x 1/2 “, 4 side Unilin Click System installation. 23.29 sq ft per box.

Coverage calculator1 box covers 23.29 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: CY-ME004 Category: Brand:

Description

Almond from the Cyrus Maple Essence collection by HTBC Flooring is a 12mm 100 hours water resistance laminate.

  • Product Type: 12mm 100 Hours water resistance laminate
  • Plank Size: 60″ x 9 1/2 ” x 1/2 ” / 1515mm x 238mm x 12mm
  • Surface: High Definition Wood Grain Texture
  • Product Features: AC4, Wide and Long Board, Liquid Wax Edge
  • Installation: 4 side Unilin Click System
  • Commercial Warranty: 5 years
  • Residential Warranty: Lifetime (limited)
  • Certifications: Carb 2, FloorScore
  • Pattern Repeat: 5 planks non-repeat
  • Pieces per Carton: 6
  • Square feet per Carton: 23.29
  • Weight per Carton (LB): 52

Additional information

Collection

Maple Essence

Product Type

12mm 100 Hours water resistance laminate

Plank Size

60" x 9 1/2 " x 1/2 " / 1515mm x 238mm x 12mm

Surface

High Definition Wood Grain Texture

Features

AC4, Wide and Long Board, Liquid Wax Edge

Installation

4 side Unilin Click System

Commercial Warranty

5 years

Residential Warranty

Lifetime (limited)

Certifications

Carb 2, FloorScore

Pattern Repeat

5 planks non-repeat

Coverage / Box

23.29 sq ft

Reviews

There are no reviews yet.

Be the first to review “Almond”

Your email address will not be published. Required fields are marked *

What Victoria homeowners say

★★★★★5.0 on Google (188 reviews)

“PI Floor helped me repair my water damaged kitchen floor, and was great. Their service was friendly and prompt, and quality of work was impeccable. I would definitely hire them again!”

Emily P.

“Zephir was great to work with. He installed a vinyl plank floor on the main to second floor stairs and the entire second floor of our townhouse. He started and finished each day on time and with...”

Richard K.

“Pi Flooring did several projects for our Co-op. They were efficient, friendly, and flexible, and they did a quality job with excellent follow-up. We were very satisfied with the final results, and we...”

Kevin C.
See all 188 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy