Jasper

Jasper: Cyrus Prime Guard collection 12mm 80 Hours Water Resistance Laminate, 60″ x 9 1/2 ” x 1/2 “, 4 Side Unilin Click System installation. 23.3 sq ft per box.

Coverage calculator1 box covers 23.3 sq ft
Total area needed-
Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: CY-PG006 Category: Brand:

Description

Jasper from the Cyrus Prime Guard collection by HTBC Flooring is a 12mm 80 hours water resistance laminate.

  • Product Type: 12mm 80 Hours Water Resistance Laminate
  • Plank Size: 60″ x 9 1/2 ” x 1/2 ” / 1515mm x 238mm x 12mm
  • Surface: Matte Finish / Embossed in Registered (EIR)
  • Product Features: AC4, Wide and Long Board, Matte Finish, 4 Sided Painted Bevel
  • Installation: 4 Side Unilin Click System
  • Commercial Warranty: 10 years
  • Residential Warranty: Lifetime (limited)
  • Certifications: Carb 2, Floors Score
  • Pattern Repeat: 6 planks non-repeating
  • Pieces per Carton: 6
  • Square feet per Carton: 23.30
  • Weight per Carton (LB): 53

Additional information

Collection

Prime Guard

Product Type

12mm 80 Hours Water Resistance Laminate

Plank Size

60" x 9 1/2 " x 1/2 " / 1515mm x 238mm x 12mm

Surface

Matte Finish / Embossed in Registered (EIR)

Features

AC4, Wide and Long Board, Matte Finish, 4 Sided Painted Bevel

Installation

4 Side Unilin Click System

Commercial Warranty

10 years

Residential Warranty

Lifetime (limited)

Certifications

Carb 2, Floors Score

Pattern Repeat

6 planks non-repeating

Coverage / Box

23.3 sq ft

Reviews

There are no reviews yet.

Be the first to review “Jasper”

Your email address will not be published. Required fields are marked *

What Victoria homeowners say

★★★★★5.0 on Google (188 reviews)

“Very knowledgeable and helpful owner. He had great recommendations for my flooring project and connected me with a very good installer. Highly recommended!”

Taner Y.

“Amazing collection, and the owner Zafer is very kind and really helpful. The new flooring looks amazing!”

Mohsin D.

“At the beginning,Zafer will help you make the right choice with so many options.When you see your floor after the installation,you will be amazed.He loves his job and works hearty.Good guy to do...”

Labrax L.
See all 188 Google reviews →

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.
Free Estimate

We use essential cookies to run this site, and with your OK, Google Analytics cookies to understand how it is used. Our live chat uses cookies to keep your conversation open. Privacy Policy