Melbourne

Harbinger vinyl flooring in Melbourne. 2.0mm thick, 0.3mm wear layer, 6″ x 48″ Plank. Glue Down installation, micro-bevel. 48.00 sq ft per box.

Coverage calculator1 box covers 48 sq ft

Room area (sq ft) Add 10% for waste (cuts and pattern matching)

Total area needed-

Boxes needed-

This is an estimate. We confirm exact quantities at your free in-home measure.

SKU: HVP 33011T Categories: Harbinger, Contract, Glue Down

Description

Harbinger Melbourne (HVP 33011T) is a glue-down luxury vinyl plank from the Harbinger Contract collection, available at PI Floor & Blinds in Victoria, BC. It has a 0.3mm wear layer and Harbinger 4S coating for scratch, scuff and stain resistance, with realistic embossed textures. Suitable for all interior floor surfaces above, on or below grade.

Dimensions	6″ x 48″ Plank
Box Coverage	48.00 sq.ft.
Thickness	2.0mm
Wear Layer	0.3mm
Edge	Micro-bevel
Construction	High pressure heat laminated
Application	Glue Down
Coating	Harbinger 4S coating for superior durability, scratch protection, stain and scuff resistance
Textures	Realistic embossing textures allow you to see the grain and knots as evident in real wood
Grade Level	Suitable for all interior floor surfaces, above, on or below grade

Additional information

Collection	Contract
Thickness	2.0mm
Wear Layer	0.3mm
Size	6" x 48" Plank
Sq Ft per Box	48.00 sq ft
Edge	Micro-bevel
Installation	Glue Down
Construction	High pressure heat laminated
Coating	Harbinger 4S coating for superior durability, scratch protection, stain and scuff resistance
Grade Level	Suitable for all interior floor surfaces, above, on or below grade

Reviews

There are no reviews yet.

Be the first to review “Melbourne”

What Victoria homeowners say

★★★★★5.0 on Google (188 reviews)

“Very good flooring job and good value also. I would recommend them highly.”

Eddie J.

“I've recently had the pleasure of doing business with PI Floor. From beginning to end it was a positive experience. Zafer and team were incredibly friendly and they were responsive to any questions I...”

Wayne L.

“We had our floor done by Zafer couple days ago. He's very responsive and gave us good deal. Quick and professional service.”

Tin P.

See all 188 Google reviews →

Installation & care

Before installation

Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.

Installation tips

Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
Mix planks from several boxes as you lay them for a natural look.
Always follow the installation instructions and warranty terms for this specific product.

Care and maintenance

Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
Wipe up spills quickly and use felt pads under furniture legs.
Use door mats at entrances to keep grit from scratching the surface.

Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

Melbourne

Description

Additional information

Reviews

What Victoria homeowners say

Installation & care

More from this collection

Canberra

Gobi

Beachcomber