Fleur flooring

Fleur

Get a Free EstimateRequest a Sample

Fleur: Pravada Le Soleil Collection engineered European White Oak, 9.5in (240mm) wide, 14mm thick with 2mm*(nominal) wear layer, wire brushed, dutch scrape matte finish.

SKU: 5376-3538 Category: Brand:

Description

FLEUR blooms in light shades of creamy beige and blonde with grey undertones. Fleur’s reclaimed charm is accented by its dark brown knots and fills, and Dutch Scrape finish – a special wire-brushing technique that adds character to these matte and modern 9.5in wide, European White Oak planks.

Specifications

  • Collection: Le Soleil
  • Species: European White Oak
  • Plank Width: 9.5in (240mm)
  • Length: 7ft (2200mm) RL
  • Thickness: 14mm
  • Wear Layer (Veneer): 2mm*(nominal)
  • Finish: UV Oil / UV Matte Lacquer
  • Texture: Wire Brushed, Dutch Scrape
  • Gloss: Matte
  • Construction: Engineered Hardwood
  • Installation: All Grades Nail/Glue/Float
  • Coverage / Box: 34.1ft2 (3.17m2)

Additional information

Collection

Le Soleil
Species

European White Oak
Plank Width

9.5in (240mm)
Length

7ft (2200mm) RL
Thickness

14mm
Wear Layer (Veneer)

2mm*(nominal)
Finish

UV Oil / UV Matte Lacquer
Texture

Wire Brushed, Dutch Scrape
Gloss

Matte
Construction

Engineered Hardwood
Installation

All Grades Nail/Glue/Float
Coverage / Box

34.1ft2 (3.17m2)

Reviews

There are no reviews yet.

Be the first to review “Fleur”

Your email address will not be published. Required fields are marked *

Installation & care

Before installation
  • Let the flooring acclimate in the room for the time the manufacturer recommends (typically 48 hours) before you start.
  • The subfloor must be clean, dry and flat. Moisture or uneven spots show through and can void a warranty.
  • Order about 10% extra for cuts and waste, and keep a few spare planks for future repairs.
Installation tips
  • Leave an expansion gap along the walls as the manufacturer specifies, and cover it with baseboard or trim.
  • Mix planks from several boxes as you lay them for a natural look.
  • Always follow the installation instructions and warranty terms for this specific product.
Care and maintenance
  • Sweep or vacuum regularly and clean with a product made for your floor type. Avoid excess water and steam mops on wood.
  • Wipe up spills quickly and use felt pads under furniture legs.
  • Use door mats at entrances to keep grit from scratching the surface.
Get a free estimate with installationOr call Pi Floor & Blinds in Victoria at +1 250-590-0030.

More from this collection

Free Estimate